Customer reviews
It is very good.
Review by M. G. on 11.03.2022 16:24:23( 5 / 5 )
The product which I received has a red laser and it appears to be of a very good quality. The laser appears to be well centered. It is of a robust construction made of metal. One 2032 coin battery is required to operate the device. The battery is supplied, but it was dead for some reason.
pottemagarn
Review by beerlund on 28.10.2015 20:09:14( 5 / 5 )
Agree! This is the "Perfect" "Item" for, having a "Perfect" NEWTON!....(Collimated and Clear)! Easy to use..... Perfect result! Recommended!
Best bang for the buck..
Review by axelrod on 19.06.2012 16:23:27( 5 / 5 )
It is an extremely easy to use and very good quality product with reasonable price. It helped me to collimate my out of align telescope in just a few minutes.
It is unrelated to the product but have to say that I am very happy with the swift order process, fast shipment and well done packaging.
Its built to a price, but easy to fix
Review by O. N. on 21.05.2021 01:18:35( 4 / 5 )
As others have stated, the laser is not perfectly aligned out of the box which does make this "unusable", but it was very easy to align (max 5min, just peel the label to get to the screws) and i have not touched it since. If you're afraid its difficult to do then you probably don't want to get a Newtonian at all.
Useful
Review by Atharva on 10.10.2020 19:35:11( 4 / 5 )
Ptet pas le moins cher ni le meilleur, mais fonctionne.
First one was DOA, second one worked perfect
Review by G. V. on 30.03.2018 13:18:13( 4 / 5 )
I ordered this one and it arrived broken, the laser would not turn on and battery was working. Contacted astroshop support and they sent me a replacement, without cost and did not require me to send the defected laser back to them. This is excellent customer support. Meanwhile newest laser is doing it's job as expected.
It does what it says, but it was way out of collimation
Review by L. S. on 10.06.2016 12:05:31( 3 / 5 )
Good product for the price, sturdy but mine was waaaay off from being collimated. It made a huge 3-4 cm diameter circle on the primary mirror when rotated in the focuser. I had to build a stand (which was easy, just a wooden plank and 4 screws screwed against each other under 90 deg. angle, so that the laser can lie on top tightly) ... anyways the laser can be collimated, you have to peel off the lable and fine the 3 allen scews. To sum it up, after I collimated it, it does a good job, but I am a bit disappointed that I had to pay 50 bucks for an untrue laser, which I had to collimate myself, on top of that the scews for collimating were glued which made it a bit harder to collimate it. Anyways 3 stars from me.
not impressed
Review by M. K. on 21.12.2017 14:10:40( 2 / 5 )
Just received it. The beam is so off axis that it hits the white target before it leaves the device housing...... well at least adjustment screws are kind of accessible when ripping off the label.
I did not expect 15deg offset from axis and would not recommend this product to others.
expensive cat toy
Review by M. V. on 20.01.2024 18:14:59( 1 / 5 )
Much like M.K. already said, mine also came completely off axis. I tried to use the adjustment screws to align it but cannot get it do be dead center, it always end up being off by a degree. Its only good for giving me very rough indication if mirror is sitting correctly after cleaning, but final collimation I still have to do by stars. Also I find it interesting that some reviews mention batteries - mine came without any
Compose your own review
Do you have specific questions about your order or products? Please contact our customer service!